%402x.svg)
No items found.
AMP 2250
2 Channel 250 Watt Per Channel, Power Amplifier (Class D)
%402x.svg)
%402x.svg)
The AMPED 2250 is one of those unique products that immediately reminds you of the best classic solid-state amplifiers from the late 70’s and early 80’s. Don’t be fooled. Rated at 250 watts/ch it has enough power to drive the most demanding speaker loads yet plays equally well with speakers of modest power requirements. Upon first listen, you know you’re hearing the best of what’s available today. Clear rich distortion-free sound fills the room lifting your musical experience to new heights. Small or large speakers, high-sensitivity or low, the 2250 plays them all with aplomb. Built around the famed Pascal module this Class D amplifier sets a new standard for sound and performance. The 2250is highly efficient meaning it runs cool, doesn’t consume massive amounts of electricity, and transfers most of its power consumption directly into power output. Made in the USA.
Features
Core Technology
- Audiophile Ultra Sonic Performance (AUSP™)
- Fully Protected High Efficiency Power Supply with Auto Selectable Mains (HEPS ™)
Features
- Number of Channels: 2
- Power Rating @ 1% THD+N @ 1kHz (with AES17 filter):
- 250WPC @ 8 Ohm
- 500WPC @ 4 Ohm
- Gain: 29dB
- Damping Factor (SE,ref. to 8 Ohm load, below 1kHz): >500
- Frequency Response: -3dB @ 8 Ohm, 5Hz – 60kHz
- THD and Noise: (@1W, 1kHz, 8 Ohm load, with AES-17 filter): 0.003%
- Inter-modulation Distortion (CCIF) (SE,18kHz and 19kHz, Po = 10W, 8 Ohm load): 0.0015%
- Transient Inter-modulationDistortion (TIM) (SE, Po = 10W @ 8 Ohm): 0.0035%
- Dynamic Range (SE, Un-weighted/ A-weighted): 116dB / 118dB
- Output Idle Noise(SE, Un-weighted / A-weighted): 70uVrms/55uVrms
- Input Impedance: Balanced (XLR) 20kOhm; Unbalanced (RCA)10k Ohm
- Remote Trigger Voltage: AC/DC, 4-15V
- AC Voltage Range: 85-265Vac
- Power Consumption:
- 1/8 Pink Noise @ 4Ohm (Both Channels Driven): 200W
- Idle: less than 12W
- Standby: less than 0.5W
Additional Protection
- Universal Mains, Automatically Adapts to All Mains World Wide
- Regulated DC Voltage, Delivers Consistent Power
- Full Power Bandwidth All the Way Up / Down
- High Efficiency Power Supply for High Power in Compact Size
Audio Inputs
- 2 L/R XLR Connectors (Balanced)
- 2 L/R Gold-plated RCA Connectors (Unbalanced)
Audio Outputs
- 2 Pairs of Gold-plated Speaker Binding Posts (Left/Right)
Control
- Stand By Front Power Switch
- Main Rear Power Switch for On & Off
- 12-Volt In/Out Remote Trigger
Physical
- Height 2U
- Front Panel Finish: Black Anodized Aluminum
- Dimensions: Width 19” x Height 3.5” x Depth 12.25”
(Width 483mm x Height 89mm x Depth 311mm) - Weight: 17.5 lbs / 8 Kg
- Power Cord: AWG 14
Technical Specs
- Power Rating @ 1% THD+N @ 1kHz (AES17 filter), single channel driven:
- 245WPC @ 8 Ohm
- 490WPC @ 4 Ohm
- Total output power limited by power supply:
- 1,000W @ 230Vac
- 700W @ 120Vac
Certifications
- ROHS compliant
- WEEE compliant
Warranty
- 5 Years Parts & Labor
Manufacturer
- Designed, Engineered & Assembled in the USA by Amped America
Benefits
- High-End Quality & High Value Stereo Amplification based on AUSP™ Class D Technology
- Great Companion for a High Performance 2-Channel Preamp or DAC
- Great add-on for Enhancing Stereo Experience from Multi-Channel AVR or Surround Processor
Applications
- High Performance 2-Channel Audio
- Home Theater
- Surround Sound
- Multi-Room & Zone Amplification
Reviews
No items found.
%402x%20(8).svg){kind=icon}
%402x.svg)
%402x%20(5).svg){kind=icon}
%402x%20(5).svg){kind=icon}